The Internet is now everywhere. In this “digital information age”, information transfer is instant and ubiquitous, making its way even to the most conservative industries such as finance and healthcare. Thanks to the innovations in hardware, devices are also getting smaller, which translates to increased mobility. In fact, mobile technology has overtaken (or at least on par with) many traditional solutions.
According to Statista, “The number of mobile phone users in the world is expected to pass the five billion mark by 2019. In 2016, an estimated 62.9 percent of the population worldwide already owned a mobile phone. The mobile phone penetration is forecasted to continue to grow, rounding up to 67 percent by 2019. China was predicted to have just over 1.4 billion mobile connections in 2017, while India was forecast to reach over one billion. By 2019, China is expected to reach almost 1.5 billion mobile connections and India almost 1.1 billion.”
These numbers can be summarized as follows:
- More than half of the world’s population use smartphones.
- Almost two-thirds of the world’s population have mobile phones.
- More than half of the world’s web traffic originate from mobile phones.
New Approach to Reducing Page Load Time
Speed is an integral part of designing web pages. Data from KISSmetrics shows that “about 40% of people will abandon a web page that takes more than 3 seconds to load.” Furthermore, if an online shopping site is making ＄100,000 per day, a 1-second page delay could potentially cost you $2.5 million in lost sales every year. To solve this issue, there is an interesting open source project called “AMP”, which stands for Accelerated Mobile Pages.
Accelerated Mobile Pages is an open source initiative project designed to optimize and speed up mobile pages. It’s like taking a page that’s already mobile friendly and making it load quicker by stripping it down to the basics. Not all mobile websites are using AMP, but it is rapidly gaining momentum.
“Accelerated Mobile Pages (AMP) is an open source initiative project/platform aimed at helping publishers improve the speed and readability of their mobile content pages,” quoted from the official AMP website.
Faster Mobile Pages + Readable Content = Better User Experience
How does AMP provide faster and smoother page experience? In the simplest terms, AMP framework achieves this by placing restrictions while developing the mobile pages.
However, AMP is not for everyone. You should take note of the below limitations when considering AMP for your applications:
- Images will only load when you scroll down to them (lazy load functionality).
- A streamlined version of your CSS will be required.
If your site is mostly serving static content, then you can directly leverage the benefits of the AMP framework. There are some workarounds where you can also use AMP for dynamic content. But if you are thinking about a site that has dynamic HTML, then AMP might not be suitable for you.
Benefits of AMP
Reduced Bounce Rate:
The correlation between site speed, page views & search engine rankings is very significant. When a web page loads very quickly, users will view more pages on the site, reducing bounce rate. In reality, well-built AMP pages typically rank higher than non-AMP pages in search engines.
Increased Mobile Browser Visibility:
Many search engines have started showing AMP powered pages in their organic search results, which increases the credibility of the site and improved click through-rate for AMP pages. In turn, search engine users will then begin to look specifically for AMP plugin pages, since these pages load up quicker than the typical mobile pages.
Flexible Ad Support:
Basic Building Blocks of AMP
AMP framework is designed to be simple for webmasters & developers. There are just 3 High Level building blocks.
- AMP HTML: A subset of HTML, this mark-up language has some custom tags and properties and many restrictions. But if you are familiar with regular HTML, you should not have difficulty adapting existing pages to AMP HTML. For more details on how it differs from basic HTML, check out AMP Project’s list of required mark-up that your AMP HTML page “must” have.
- AMP Cache: An optional Content Delivery Network, it will take your AMP-enabled pages, cache them and automatically make some performance optimizations.
How to Integrate AMP into Existing Sites
If you are using a CMS like WordPress, the AMP plugin does most of the work for you. But if you are using other CMS, or you have created a custom CMS for yourself, you will need to take care of creating the AMP pages by yourself.
If you are beginner, you will be using the basic setup like the one above. You are recommended to set up both traditional HTML pages alongside AMP Pages to get comfortable with AMP. Make sure the AMP Pages are served with via a different URL. Once you are comfortable, you can create AMP pages as your main site.
Integrating AMP with Analytics
To prevent multiple analytics tracking from slowing down a site, AMP implemented the philosophy of “measure once, report to many.” There are two paths to enable analytics functionality with AMP for your website:
- The Amp-Pixel Element: This is a simple tag that can be used to count page views as a typical tracking pixel would, using a GET request. There are a number of variables that can be passed through it, such as DOCUMENT_REFERRER and Title.
- The Amp-Analytics Extended Component: This is a little bit more advanced than the amp-pixel. It is likely what you’ll use to implement analytics on your site because it allows for a greater level of configuration for analytics interactions.
and then configure it via some JSON mark-up in the body section of your page.
What can I do If I want to inject/refer my legacy pages?
Injecting/Referring Legacy Pages into AMP Pages
AMP provides a way to inject your Legacy pages (non-amp pages) into AMP Pages by using iframes, but you have to eye-out for the restrictions that come along the way. Iframes are given very low priority and should be presented towards the end of a page or at least after 75% of the page. The purpose of doing this is so that iframe will not slow down the page load speed, which will in turn affect the user experience.
Attractive UI and UX Options with AMP
Most people think with these restrictions, we need to compromise on the UI/UX Design. On the contrary, AMP HTML provides a lot of components that helps make your website attractive. The list is too long and I probably can’t go through every one of it, but all the components are classified into three types:
- Built-In : Components that are included in the base library.
- Extended : Extensions to the base library that must be explicitly included in the document as custom elements.
- Experimental : Components that are released but are not yet ready for wide use.
In addition to the classification by type, the amp components can be categorized into:
- Ads and analytics
- Dynamic content
If you want to learn more about this, you can refer to the official AMP documentation.
In my opinion, AMP provides enough toolkit for developers to create beautiful looking blogs and websites. AMP CSS mandates 50 KB of inline CSS, which actually plenty for most websites. In addition, optimizing and compressing the CSS with scss will give more room for developers to accommodate more CSS attributes.
However, due to this restriction, we will not be using additional CSS attributes. By doing so, we essentially prevent any sudden surprise and reduce the testing time as well as bugs. All changes made to the page will only be limited to that particular page, making sure that changes are not affecting the other pages.
The time it takes to do style-recalculations and layouts are restricted by DOM size, so the iframe recalculations are very fast compared to recalculating styles and layout for the page.
Creating a Functional Mobile Website with AMP
Going further, we are going to design an e-commerce application that is optimized for mobile devices. We will be leveraging the benefits of AMP to provide a responsive, fast-loading and cache-enabled e-commerce store. The e-commerce mobile application will be built in 3 steps, each presented as an individual tutorial.
1. Basic Building Blocks and UI Using AMP
In this section we will be discussing about creating the user interface of The E-Commerce store. We will be using AMP components to achieve this. Here we will be a deep diving in to the AMP HTML Components & AMP JS
2. Creating Backend with Alibaba Cloud ApsaraDB for MongoDB
We will be exploring the ApsaraDB for MongoDB product in depth. Offered by Alibaba Cloud, ApsaraDB for MongoDB will be the backend for our application. Due to certain limitations, we will be creating a small architectural solution to make the application work with Mongo DB. Creating an architectural solution is not as scary as it sounds, it is very easy if you can follow along with the article.
3. Integrating the Entire Application with Alibaba Cloud ApsaraDB for MongoDB
In this part, we will be integrating the UI along with the backend created on ApsaraDB for MongoDB. This section is very important as we are going to create the core functionality by integrating the application. We will also talk about the overall functionality of our application.
Stay tuned to the Alibaba Cloud Blog for these tutorials!